Dynamic SSH keys

When using this type, the administrator registers a secret key with appropriate sudo privileges on the remote machines; for every authorized credential request, Vault creates a new SSH key pair and appends the newly-generated public key to the authorized_keys file for the configured username on the remote host. Vault uses a configurable install script to achieve this.

The secrets engine does not prompt for sudo passwords; the NOPASSWD option for sudoers should be enabled at all remote hosts for the Vault administrative user.

The private key returned to the user will be leased and can be renewed if desired. Once the key is given to the user, Vault will not know when it gets used or how many time it gets used. Therefore, Vault WILL NOT and cannot audit the SSH session establishments.

When the credential lease expires, Vault removes the secret key from the remote machine.

This page will show a quick start for this secrets engine. For detailed documentation on every path, use vault path-help after mounting the secrets engine.

Drawbacks

The dynamic key type has several serious drawbacks:

1. Audit logs are unreliable: Vault can only log when users request credentials, not when they use the given keys. If user A and user B both request access to a machine, and are given a lease valid for five minutes, it is impossible to know whether two accesses to that user account on the remote machine were A, A; A, B; B, A; or B, B.
2. Generating dynamic keys consumes entropy: Unless equipped with a hardware entropy generating device, a machine can quickly run out of entropy when generating SSH keys. This will cause further requests for various Vault operations to stall until more entropy is available, which could take a significant amount of time, after which the next request for a new SSH key will use the generated entropy and cause stalling again.
3. This type makes connections to client hosts; when this happens the host key is not verified.

sudo

In order to adjust the authorized_keys file for the desired user, Vault connects via SSH to the remote machine as a separate user, and uses sudo to gain the privileges required. An example sudoers file is shown below.

File: /etc/sudoers

# This is a sample sudoers statement; you should modify it# as appropriate to satisfy your security needs.vaultadmin   ALL=(ALL)NOPASSWD: ALL

Configuration

Next, infrastructure configuration must be registered with Vault via roles. First, however, the shared secret key must be specified.

Mount the secrets engine

$ vault secrets enable sshSuccessfully mounted 'ssh' at 'ssh'!

Registering the shared secret key

Register a key with a name; this key must have administrative capabilities on the remote hosts.

$ vault write ssh/keys/dev_key \    key=@dev_shared_key.pem

Create a role

Next, create a role. All of the machines contained within this CIDR block list should be accessible using the registered shared secret key.

$ vault write ssh/roles/dynamic_key_role \    key_type=dynamic \    key=dev_key \    admin_user=username \    default_user=username \    cidr_list=x.x.x.x/ySuccess! Data written to: ssh/roles/dynamic_key_role

cidr_list is a comma separated list of CIDR blocks for which a role can generate credentials. If this is empty, the role can only generate credentials if it belongs to the set of zero-address roles.

Zero-address roles, configured via /ssh/config/zeroaddress endpoint, takes comma separated list of role names that can generate credentials for any IP address.

Use the install_script option to provide an install script if the remote hosts do not resemble a typical Linux machine. The default script is compiled into the Vault binary, but it is straight forward to specify an alternate. The script takes three arguments which are explained in the comments.

To see the default, see linux_install_script.go

Create a credential

Create a dynamic key for an IP of the remote host that is covered by dynamic_key_role's CIDR list.

$ vault write ssh/creds/dynamic_key_role ip=x.x.x.xKey             Valuelease_id        ssh/creds/dynamic_key_role/8c4d2042-23bc-d6a8-42c2-6ff01cb83cf8lease_duration  600lease_renewable trueip              x.x.x.xkey             -----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----key_type        dynamicport            22username        username

Establish an SSH session

Save the key to a file (e.g. dyn_key.pem) and then use it to establish an SSH session.

$ ssh -i dyn_key.pem username@<IP of remote host>username@<IP of remote host>:~$

Automate it!

Creation of new key, saving to a file, and using it to establish an SSH session can all be done with a single Vault CLI command.

$ vault ssh -role dynamic_key_role username@<IP of remote host>username@<IP of remote host>:~$

API

The SSH secret secrets engine has a full HTTP API. Please see the SSH secret secrets engine API for more details.