Multi-region deployments

Federated Nomad clusters enable users to submit jobs targeting any region from any server even if that server resides in a different region. As of Nomad 0.12 Enterprise, you can also submit jobs that are deployed to multiple regions. This tutorial demonstrates multi-region deployments, including configurable rollout and rollback strategies.

You can create a multi-region deployment job by adding a multiregion stanza to the job as shown below.

multiregion {  strategy {    max_parallel = 1    on_failure   = "fail_all"  }  region "west" {    count       = 2    datacenters = ["west-1"]  }  region "east" {    count       = 1    datacenters = ["east-1", "east-2"]  }}

Prerequisites

To perform the tasks described in this guide, you need to have two Nomad environments running Nomad 0.12 or greater with ports 4646, 4647, and 4648 exposed. You can use this Terraform environment to provision the sandbox environments. This guide assumes two clusters with one server node and two client nodes in each cluster. While the Terraform code already opens port 4646, you will also need to expose ports 4647 and 4648 on the server you wish to run nomad server join against. Consult the Nomad Port Requirements documentation for more information.

Next, you'll need to federate these two regions as described in the federation guide.

Run the nomad server members command.

$ nomad server members

After you have federated your clusters, the output should include the servers from both regions.

Name                     Address        Port  Status  Leader  Protocol  Build       Datacenter  Regionip-172-31-26-138.east    172.31.26.138  4648  alive   true    2         0.12.0+ent  east-1      eastip-172-31-29-34.west     172.31.29.34   4648  alive   true    2         0.12.0+ent  west-1      west

If you are using ACLs, you'll need to make sure your token has submit-job permissions with a global scope.

You may wish to review the update strategies guides before starting this guide.

Multi-region concepts

Federated Nomad clusters are members of the same gossip cluster but not the same raft/consensus cluster; they don't share their data stores. Each region in a multi-region deployment gets an independent copy of the job, parameterized with the values of the region stanza. Nomad regions coordinate to rollout each region's deployment using rules determined by the strategy stanza.

A single region deployment using one of the various update strategies begins in the running state and ends in either the successful state if it succeeds, the canceled state if another deployment supersedes it before it's complete, or the failed state if it fails for any other reason. A failed single region deployment may automatically revert to the previous version of the job if its update stanza has the auto_revert setting.

In a multi-region deployment, regions begin in the pending state. This allows Nomad to determine that all regions have accepted the job before continuing. At this point, up to max_parallel regions will enter running at a time. When each region completes its local deployment, it enters a blocked state where it waits until the last region has completed the deployment. The final region will unblock the regions to mark them as successful.

Create a multi-region job

The job below will deploy to both regions. The max_parallel field of the strategy block restricts Nomad to deploy to the regions one at a time. If either of the region deployments fail, both regions will be marked as failed. The count field for each region is interpolated for each region, replacing the count = 0 in the task group count. The job's update block uses the default "task states" value to determine if the job is healthy; if you configured a Consul service with health checks you could use that instead.

job "example" {  multiregion {    strategy {      max_parallel = 1      on_failure   = "fail_all"    }    region "west" {      count       = 2      datacenters = ["west-1"]    }    region "east" {      count       = 1      datacenters = ["east-1", "east-2"]    }  }  update {    max_parallel      = 1    min_healthy_time  = "10s"    healthy_deadline  = "2m"    progress_deadline = "3m"    auto_revert       = true    auto_promote      = true    canary            = 1    stagger           = "30s"  }  group "cache" {    count = 0    network {      port "db" {        to = 6379      }    }    task "redis" {      driver = "docker"      config {        image = "redis:6.0"        ports = ["db"]      }      resources {        cpu    = 256        memory = 128      }    }  }}

Run the multi-region job

You can run the job from either region.

$ nomad job run ./multi.nomad

If successful, you should receive output similar to the following.

Job registration successfulEvaluation ID: f71cf273-a29e-65e3-bc5b-9710a3c5bc8f

Check the job status from the east region.

$ nomad job status -region east example

Note that there are no running allocations in the east region, and that the status is "pending" because the east region is waiting for the west region to complete.

...Latest DeploymentID          = d74a086bStatus      = pendingDescription = Deployment is pending, waiting for peer regionMultiregion DeploymentRegion  ID        Statuseast    d74a086b  pendingwest    48fccef3  runningDeployedTask Group  Auto Revert  Desired  Placed  Healthy  Unhealthy  Progress Deadlinecache       true         1        0       0        0          N/AAllocationsNo allocations placed

Check the job status from the west region.

$ nomad job status -region west example

You should observe running allocations.

...Latest DeploymentID          = 48fccef3Status      = runningDescription = Deployment is runningMultiregion DeploymentRegion  ID        Statuseast    d74a086b  pendingwest    48fccef3  runningDeployedTask Group  Auto Revert  Desired  Placed  Healthy  Unhealthy  Progress Deadlinecache       true         2        2       0        0          2020-06-17T13:35:49ZAllocationsID        Node ID   Task Group  Version  Desired  Status   Created  Modified44b3988a  4786abea  cache       0        run      running  14s ago  13s ago7c8a2b80  4786abea  cache       0        run      running  13s ago  12s ago

The west region should be healthy 10s after the task state for all tasks switches to "running". To observe, run the following status check.

$ nomad job status -region west example

At this point, the status for the west region will transition to "blocked" and the east region's deployment will become "running".

...Latest DeploymentID          = 48fccef3Status      = blockedDescription = Deployment is complete but waiting for peer regionMultiregion DeploymentRegion  ID        Statuseast    d74a086b  runningwest    48fccef3  blocked

Once the east region's deployment has completed, check the status again.

$ nomad job status -region east example

Both regions should transition to "successful".

...Latest DeploymentID          = d74a086bStatus      = successfulDescription = Deployment completed successfullyMultiregion DeploymentRegion  ID        Statuseast    d74a086b  successfulwest    48fccef3  successful

Failed deployments

Next, you'll simulate a failed deployment. First, add a new task group that will succeed in the west region but fail in the east region.

group "sidecar" {  # set the reschedule stanza so that we don't have to wait too long  # for the deployment to be marked failed  reschedule {    attempts       = 1    interval       = "24h"    unlimited      = false    delay          = "5s"    delay_function = "constant"  }  task "sidecar" {    driver = "docker"    config {      image   = "busybox:1"      command = "/bin/sh"      args    = ["local/script.sh"]    }    # this script will always fail in the east region    template {      destination = "local/script.sh"      data        = <<EOTif [[ ${NOMAD_REGION} == "east" ]]thenecho FAILexit 1fiecho OKsleep 600EOT    }    resources {      cpu    = 128      memory = 64    }  }}

Next, change the on_failure field of the multiregion strategy to "fail_local". This will cause only the failed region to be marked as failed.

strategy {  max_parallel = 1  on_failure   = "fail_local"}

Run the job again.

$ nomad job run ./multi.nomad

The output should indicate success.

Job registration successfulEvaluation ID: e878bb98-6b23-c3de-dce1-10ea37c702f7

Now check the status

$ nomad job status -region west example

As with the previous version of the job, you should see the deployment in the west in the "running" status and the deployment in the east in "pending". Eventually, the east region deployment will run and then fail. Because on_failure was set to "fail_local", the west region remains in a "blocked" state:

Latest DeploymentID          = f08122e5Status      = blockedDescription = Deployment is complete but waiting for peer regionMultiregion DeploymentRegion  ID        Statuseast    8b12b453  failedwest    f08122e5  blocked

At this point, the west region will remain in the blocked state. You can either fix the job and redeploy, or accept the west deployment in its current state by using the nomad deployment unblock command.

$ nomad deployment unblock -region west f08122e5

If successful, the output will be similar to the following.

Deployment "f08122e5-fc7e-f450-f61e-81ac48db55cb" unblocked

Check the status again.

$ nomad job status -region west example

The west region should now be marked as successful:

...Latest DeploymentID          = f08122e5Status      = successfulDescription = Deployment completed successfullyMultiregion DeploymentRegion  ID        Statuseast    8b12b453  failedwest    f08122e5  successful

Learn more about federation

• Deployment Topology across Multiple Regions